石墨烯薄膜原子氧剥蚀行为及电阻特性

目的研究石墨烯薄膜在原子氧空间环境的适应性,为其在航天器上应用提供参考。方法采用刮涂法制备石墨烯薄膜,将石墨烯薄膜材料及石墨烯电阻传感器置于微波源原子氧设备内开展原子氧试验,原子氧剂量分别为3.0×10^20 atoms/cm2和7.5×10^20 atoms/cm^2,研究薄膜表面形貌、结构、成分及电阻性能的变化。结果采用刮涂法可制备氧含量较低的石墨烯薄膜,原子氧剂量为7.5×10^20 atoms/cm^2情况下,石墨烯薄膜的厚度损失为5.3μm,原子氧反应率为7.14×10^-25 atoms/cm^3。原子氧作用后,石墨烯薄膜中碳原子无序程度增大,C—O、—COOH官能团含量降低,C=O官能团含量增加。石墨烯电阻传感器的R0/R比值随原子氧剂量增加线性降低,0.8μm厚度薄膜可探测最大原子氧剂量为5×10^19 atoms/cm^2,增加薄膜厚度有望提高传感器的使用寿命。结论得到了石墨烯薄膜厚度损失、原子氧反应率、微观结构及电阻特性的变化规律,可为石墨烯薄膜的空间应用提供技术支撑。     

智能化有害有毒气体污染源监测仪的研究

为了快速寻找有害有毒气体污染源,利用8个红外激光气体传感器,分别安装步进电机驱动旋转的圆盘圆周上在不同的方向上对污染气体进行数据采集。同时与二维热差式风速风向传感器采集到的风速风向数据,一并送入MSC1210单片机进行数据处理和运用智能人工神经网络进行模式训练与模式识别,从而识别出污染源的位置、浓度和种类。通过GPS全球卫星定位系统和GPRS无线传输网络,把监测到的信息发送给相关部门早做处理,并报警,避免污染进一步扩散。实验表明,该智能化追索气体污染源监测仪具有良好的可靠性、安全性和实用性。     

Measurement of air exchange rates in different indoor environments using continuous CO2 sensors

A new air exchange rate (AER) monitoring method using continuous CO₂ sensors was developed and validated through both laboratory experiments and field studies. Controlled laboratory simulation tests were conducted in a 1-m³ environmental chamber at different AERs (0.1-10.0 hr^-1). AERs were determined using the decay method based on box model assumptions. Field tests were conducted in classrooms, dormitories, meeting rooms and apartments during 2-5 weekdays using CO₂ sensors coupled with data loggers. Indoor temperature, relative humidity (RH), and CO₂ concentrations were continuously monitored while outdoor parameters combined with on-site climate conditions were recorded. Statistical results indicated that good laboratory performance was achieved: duplicate precision was within 10%, and the measured AERs were 90%-120% of the real AERs. Average AERs were 1.22, 1.37, 1.10, 1.91 and 0.73 hr^-1 in dormitories, air-conditioned classrooms, classrooms with an air circulation cooling system, reading rooms, and meeting rooms, respectively. In an elderly particulate matter exposure study, all the homes had AER values ranging from 0.29 to 3.46 hr??1 in fall, and 0.12 to 1.39 hr^-1 in winter with a median AER of 1.15.     

传感技术用于甲醛测定的研究

甲醛是一种重要的工业原料,在化工、食品、建材等方面有着广泛的应用。由于甲醛毒性大,且被怀疑具有致癌作用,目前已被认为是工厂区和室内空气中最重要的污染物之一。随着人们对空气污染的日益关注,对甲醛的准确及时检测显得更加重要。基于传感器技术而研制出的甲醛测定仪,让我们看到传感技术运用于甲醛测定领域的发展前景。本文就测定甲醛的传感器技术如电化学传感器、光化学传感器、金属氧化物传感器、电子鼻以及声表面波式传感器的一些重要应用进行了阐述。     

Predicting Satisfaction with Smart Irrigation Controllers and Their Long‐Term Use among Homeowners in Central Florida

Studies throughout Florida have shown smart controllers can substantially reduce irrigation under residential high‐water use conditions. However, successful promotion requires understanding the link between controller performance and the mechanisms by which they are adopted. This article compares irrigation water‐use and survey data collected from households installed with soil moisture sensor and evapotranspiration controllers. The study investigated whether the relative change in irrigation use between two years preceding and two years following installation was a reliable predictor of a homeowner's satisfaction with the device and likelihood of continuing to use it. Results indicated relative changes in irrigation use were only significantly associated with the quality of controller programming. Satisfaction with the controller was largely attributable to satisfaction with the appearance of the landscape and the perceived water‐saving effectiveness of the controller whereas the likelihood of its continued use was only significantly predicted by the level of technical knowledge regarding its functioning and whether or not challenges were experienced with it. Targeting homeowners with supplemental user‐friendly information may best support their long‐term adoption of smart controllers while providing irrigation contractors with training in implementation techniques would represent an integrated strategy for added reductions in residential outdoor water use.     

Designing and Implementing a Network for Sensing Water Quality and Hydrology across Mountain to Urban Transitions

Water resources are increasingly impacted by growing human populations, land use, and climate changes, and complex interactions among biophysical processes. In an effort to better understand these factors in semiarid northern Utah, United States, we created a real‐time observatory consisting of sensors deployed at aquatic and terrestrial stations to monitor water quality, water inputs, and outputs along mountain to urban gradients. The Gradients Along Mountain to Urban Transitions (GAMUT) monitoring network spans three watersheds with similar climates and streams fed by mountain winter‐derived precipitation, but that differ in urbanization level, land use, and biophysical characteristics. The aquatic monitoring stations in the GAMUT network include sensors to measure chemical (dissolved oxygen, specific conductance, pH, nitrate, and dissolved organic matter), physical (stage, temperature, and turbidity), and biological components (chlorophyll‐a and phycocyanin). We present the logistics of designing, implementing, and maintaining the network; quality assurance and control of numerous, large datasets; and data acquisition, dissemination, and visualization. Data from GAMUT reveal spatial differences in water quality due to urbanization and built infrastructure; capture rapid temporal changes in water quality due to anthropogenic activity; and identify changes in biological structure, each of which are demonstrated via case study datasets.     

压力传感器位移分析及疲劳寿命预测

完成了依据有限元疲劳分析为基础的传感器寿命预测研究工作。阐述压力传感器工作原理,定义影响系统寿命的参数组,既包含力学环境参数,亦包括材料属性、几何形式等结构参数。针对不同参数属性,依据疲劳强度计算需求,构建有限元数值计算模型;根据影响传感器寿命的传感单元单晶硅S-N(应力-循环)分布,完成变载荷输入条件下模型疲劳分析,依据数值计算结果完成该压力传感器寿命预测工作。结果表明:压力传感器使用寿命在7.068E8次数以上。本课题研究提出的新方法,摆脱了传统依靠试验完成多种材料组成结构体的疲劳分析及寿命预测窘境,具有通用性。     

有序介孔碳载金/L-赖氨酸/纳米金修饰电极的制备及其对邻苯二酚、对苯二酚的检测响应研究

通过化学还原的方法合成有序介孔碳负载纳米金粒子,并构筑有序介孔碳载金/L-赖氨酸/纳米金复合膜修饰玻碳电极;利用扫描电镜观察介孔碳和介孔碳复合膜的微观结构,并用循环伏安法、电化学阻抗谱表征自组装电极的过程.在此基础上用差分脉冲伏安法研究对苯二酚和邻苯二酚混合物在该电极上的电催化氧化,研制了一种基于有序介孔碳载金/L-赖氨酸/纳米金复合膜修饰电极分别检测对苯二酚和邻苯二酚的传感器.在最优的实验条件下,该传感器在对苯二酚和邻苯二酚浓度为1×10-6～8×10-4mol·L-1的范围内具有良好的线性关系,检出限分别为3×10-7mol·L-1、7×10-7mol·L-1.     

重金属阳离子荧光传感器合成及光谱性研究

通过亚胺缩合的反应制备出阳离子荧光传感器（Cation Fluorescent Sensors,CFSs）,并对其结构、光谱性能检测、荧光量子产率等进行了详细的研究.通过荧光化学传感器产生的荧光光谱一直是高效的分析方法,因此合成了新的基于席夫碱的荧光化学传感器,并研究了对各种金属离子的结合特性.在CH3CN溶液中测试了阳离子荧光传感器时不同阳离子的选择性响应,发现对Cu2＋有较好的选择性,可用于Cu2＋的检测.该类阳离子荧光传感器是基于2,2-联噻吩-5-乙醛的荧光发射基团和邻氨基苯甲醚为识别基团的一类阳离子荧光传感器.     

密封充氢环境条件下固态电化学氢气传感器效应试验研究

目的研究密闭充氢环境下固态电化学氢气传感器效应。方法设计能模拟低氧、低氢和压力变化的密闭充氢环境,并在此环境中进行一系列氢气传感器效应试验,分析、评定试验数据。结果得到了不同环境下氢气、氧气浓度随时间变化的规律,提出固态电化学氢气传感器的有效工作环境,并预测了其在不同贮存环境下的工作寿命。结论密闭充氢环境内压力和温度的变化对固态电化学氢气传感器影响较大,湿度影响较小,注气检定合格的氢气传感器,在密封容器内扩散式检定,不合格率高,检定数据误差大于±5%FS。